Operation Manual

YS 1500

Smoker Assembly

Smoker Arrival

Your Yoder Smoker will arrive on a pallet wrapped and held on with metal bands. Cut

the bands and remove the plastic wrap and foam from the smoker. Remove the smoker

from the pallet. It is recommended that two people remove the Yoder from the pallet

due to its size and weight. Open the hopper lid and remove the grease bucket that

contains the power cord and a spare fuse and set aside. Open the cooking cham-

ber and remove all the wrapped components. There will be a front shelf, two cooking

grates, a second shelf, a heat management platet, and burn grate.

NOTE: If a bag of pellets were ordered they will be in the cooking chamber as well.

Assembly of your new Yoder starts by installing the burn grate inside the rebox. See

FIG 1.

FIREBOX

BURN

GRATE

Install the heat management plate second. See FIG 2.

FIG 1

FIG 2