User Manual

IM 01E20C02-01E

5-4

5. BASIC OPERATING PROCEDURES

A screen is displayed to confirm whether or not the

system is to enter Setting Mode.

Press the

switch and select [Yes].

When [Yes] has been selected, touch the

switch.

NOTE

When the operations except and

switches are carried out, the system will

automatically return to the Display Mode.

When no operations in this display are carried

out for 20 seconds, the system will automati-

cally return to the Display Mode.

In order to request confirmation, the entire display

flashes on and off.

Touch the switch once again at this time to

fix your selection.

NOTE

When no operations in the flashed display are

carried out for 20 seconds, the system will

automatically return to the Display Mode.

When the operations except are carried

out, the system will automatically return to the

Display Mode.

The system enters Setting Mode.

Parameters to be set can be selected.

This completes the procedure for changing from the

Display Mode to the Parameter Search Mode.

F0503-2.EPS

The reversed-character (i.e. the cursor position)

indicates the item that is currently selected.

Setting Mode

To Parameter

Search Mode

Setting Mode

Yes

Setting Mode

Ye s

Setting Mode

Yes

Setting Mode

P:Protect

B:Easy Setup

C:Basic Setup