Manual
<D4. Starting up the Field Wireless System>
D4-34
IM 01W02D01-01EN
Each item except the status eld is same as Radio Firmware. The status eld shows that if
rmware update is running, a progress is shown, otherwise “Detected” is shown.
Each button and notication are same as Radio Firmware. For details see a description of the
Radio Firmware part.
Firmware update procedure
This sub-section describes a procedure of updating rmware as an example updating sensor
rmware.
In the [Sensor Firmware] tab shown in Figure D4-25, select the device to be updated. Click the
[Download Firmware] button to open the window shown in Figure D4-27.
For radio rmware and backbone device rmware downloads, this dialog does not appear.
FD0427.ai
Figure D4-27 Update Sensor Firmware Window
The TSAP ID and Object ID are already lled; do not change these. To select the rmware le for
the update, click right side the button of Firmware le eld to open the Open Firmware File dialog
shown in Figure D4-28 for selecting the new rmware. In radio rmware and backbone device
rmware case, the Open Firmware File window is opened by clicking [Download Firmware] but-
ton.