Datasheet

YZ-WS5N40N

FEATURES

High Luminous Output Sunny White LED Lamp

Chip Technology ─ InGaN

Water Clear Epoxy Package

Lens Size 5mm

Viewing Angles 2θ ½ = 40° (Reference)

Stand-Off Options

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance ± 0.25 (0.01’’) mm unless otherwise noted.

3. Protruded resin under flange is 1.0mm (0.04’’) max.

4. Lead spacing is measured where the leads emerge from the package

5. Specifications are subject to change without notice.

Delivery

 Bulk, 500 pieces per bag standard

 Ammo or Reel available upon request

PAGE 1
YZ-WS5N40N FEATURES High Luminous Output Sunny White LED Lamp Chip Technology ─ InGaN Water Clear Epoxy Package Lens Size 5mm Viewing Angles 2θ ½ = 40° (Reference) Stand-Off Options Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance ± 0.25 (0.01’’) mm unless otherwise noted. 3. Protruded resin under flange is 1.0mm (0.04’’) max. 4. Lead spacing is measured where the leads emerge from the package 5. Specifications are subject to change without notice.
PAGE 2
YZ-WS5N40N Absolute Maximum Ratings at Ta = 25°C Item Symbol Absolute Maximum Rating Unit DC Forward Current IF 30 mA Peak Pulsed Forward Current ※ IFP 150 mA Reverse Voltage VR 5 V 0.40 mA/ °C Derating Factor Power Dissipation Pd 120 mW Operating Temperature Topr -30 ~ +85 ℃ °C Storage Temperature Tstg -40 ~ +100 ℃ °C Solder Dipping Temperature Tsld 260℃ for 5 sec Remarks: Duty Ratio = 1/10, Pulse Width = 0.
PAGE 3
YZ-WS5N40N Soldering Conditions - Lamp Type LED Solder the LED no closer than 3mm from the base of the epoxy bulb. Soldering beyond the base of the tie bar is recommended Recommended soldering conditions Dip Soldering 100℃ Max. 60 sec. Max. 260℃ Max. 5 sec. Max. No lower than 3mm from the base of the epoxy bulb. Pre-Heat Pre-Heat Time Solder Bath Temperature Dipping Time Dipping Position Hand Soldering 3Ø Series Temperature Soldering time Position Others (Including Lead-Free Solder) 300℃ Max. 3 sec.