User Guide

Quick Start Guide
YS1B01-UN
YoLink Uno
WiFi Camera
Revision Jan. 31, 2023
LED & Sound Behaviors:
Get to Know Your Uno
Camera
E
Get to Know Your Uno
Camera, Cont.
E
Photosensitive
Detector
Status LED
Microphone
MicroSD Card Slot
Reset Button
The camera supports a MicroSD
card that is up to 128 GB.
Speaker
USB Power Port
In the Box
C
YoLink Uno WiFi
Camera
Screws (3)
AC/DC Power
Supply Adapter
Anchors (3)
Quick Start Guide
Red LED On
Camera Start-Up or WiFi Connec-
tion Failure
One Beep
Start-Up Complete or Camera
Received QR Code
Flashing Green LED
Connecting to WiFi
Green LED On
Camera is Online
Flashing Red LED
Waiting for WiFi Connection
Information
Slow Flashing Red LED
Camera Updating
USB Cable
(Micro B)
Mounting Base Template
Power Up
F
Plug in the USB cable to connect the
camera and power supply. When the red
LED is on, it means the device is on.
Install your MicroSD memory card, if
applicable, in the camera at this time.
Welcome!
A
Thank you for purchasing YoLink
products! We appreciate you trusting
YoLink for your smart home & automa-
tion needs. Your 100% satisfaction is our
goal. If you experience any problems
with your installation, with our products
or if you have any questions that this
manual does not answer, please contact
us right away. See the Contact Us
section for more info.
Thank you!
Eric Vanzo
Customer Experience Manager
User Guide Conventions
The following icons are used in this guide to
convey specific types of information:
Very important information
(can save you time!)
Pour des instructions en
français, scannez les codes
QR dans la section suivante.
Para obtener instrucciones en
español, escanee los códigos
QR en la siguiente sección.
You may require these items:
Medium Phillips
Screwdriver
Required Items
D
Drill with Drill Bits
Fr
Es
The Uno WiFi Camera has a MicroSD
memory card slot, and supports cards up
to 128GB in capacity. It is recommended
to install a memory card (not included) in
your camera.
Before You Begin
B
Installation & User
Guide
Product Support
Support produit
Soporte de producto
You can also find all guides and
additional resources, such as videos and
troubleshooting instructions, on the
YoLink Uno WiFi Camera Product
Support page by scanning the QR code
below or by visiting:
https://shop.yosmart.com/pages/
uno-product-support
Please note: this is a quick start guide,
intended to get you started on the
installation of your YoLink Uno WiFi
Camera. Download the full Installation &
User Guide by scanning this QR code:
Open the app and tap Sign up for an
account. You will be required to provide
a username and a password. Follow the
instructions, to set up a new account.
Allow notifications, when prompted.
You will immediately receive a welcome
email from [e-mail] with
some helpful information. Please mark
the yosmart.com domain as safe, to
ensure you receive important messages
in the future.
Log in to the app using your new
username and password.
The app opens to the Favorite screen.
This is where your favorite devices and
scenes will be shown. You can organize
your devices by room, in the Rooms
screen, later.
Install the App
G
If you are new to YoLink, please install
the app on your phone or tablet, if you
have not already. Otherwise, please
proceed to the next section.
Scan the appropriate QR code below or
find the “YoLink app” on the appropriate
app store.
Apple phone/tablet
iOS 9.0 or higher
Android phone or
tablet 4.4 or higher
Add Your Uno Camera to
the App
H
1. Tap Add Device (if shown) or tap the
scanner icon:
Scanner icon
Drilling Position