User Manual
Table Of Contents
- Service Guarantee
- 1.Introduction
- 1.Installation
- 2.SD Card Slot
- 3.APP Download
- 5.Mobile APP CamHipro Connection
- 5.2 Connect to IP Camera Hot-Spot and then Configu
- 5.3 Add Camera
- 5.4 Wi-Fi Setting
- 5.5 Connect the Camera by Searching Nearby Devices
- 5.6 Mobile APP Function Introduction
- 5.6.1 Micro SD Card Video files playback and downl
- 5.6.2 Local files, device list and add new camera
- 5.6.3 Pre-set point and auto cruise (For PTZ)
- 5.6.4 Change password
- 5.6.5 Set factory default settings of the camera
- 5.6.6 Alarm management and notification
- 5.6.7 Motion Detection
- 5.6.9 FTP setting
- 5.6.10 Video and audio settings
- 5.6.11 SD card plan recording
- 5.6.12 Device time setting
- 5.6.13 SD card setting
- 6.Computer Browsing Access
- 7.Video Management Software (HIP2P Client)
- Frequently Asked Questions
- Check your connecting device:
- 20 -
6.Computer Browsing Access
6.1 Download Search Tool
Download Software from the website (https://yoluke-tech.com/pages/software-of-security-camera) or
insert the Mini CD into your computer then install the search tool onto your computer. Click “next” to find the
IP camera. You can also select Network Card to search for the IP Camera.
Note:Through the search tool you can find all IP camera in your local area network,and can modify the
basic configuration of the camera such as: IP address, user name and password, camera name, etc...
You can also access the camera through the browser (IE is the browser recommended) where you can
test the camera and configure all the settings of the camera.
6.2 Search IP Camera
Click “next” to find IP camera. You can select Network Card to search IP Camera.