User Manual
Table Of Contents
- Service Guarantee
- 1.Introduction
- 1.Installation
- 2.SD Card Slot
- 3.APP Download
- 5.Mobile APP CamHipro Connection
- 5.2 Connect to IP Camera Hot-Spot and then Configu
- 5.3 Add Camera
- 5.4 Wi-Fi Setting
- 5.5 Connect the Camera by Searching Nearby Devices
- 5.6 Mobile APP Function Introduction
- 5.6.1 Micro SD Card Video files playback and downl
- 5.6.2 Local files, device list and add new camera
- 5.6.3 Pre-set point and auto cruise (For PTZ)
- 5.6.4 Change password
- 5.6.5 Set factory default settings of the camera
- 5.6.6 Alarm management and notification
- 5.6.7 Motion Detection
- 5.6.9 FTP setting
- 5.6.10 Video and audio settings
- 5.6.11 SD card plan recording
- 5.6.12 Device time setting
- 5.6.13 SD card setting
- 6.Computer Browsing Access
- 7.Video Management Software (HIP2P Client)
- Frequently Asked Questions
- Check your connecting device:
- 23 -
Adjust the camera rotation speed and preset point
settings: Select pre-setting point 1, the camera rotates
to the screen position 1 you want to monitor, click on
pre-setting to set the preset point. Type 41 in the
pre-setting area to call the command of auto cruise.
6.5 Parameter Settings
6.5.1 Setting
Media
Video: Set the video format, video coding, resolution, bit rate, max frame rate, key frame interval, bit rate
control and image quality.
OSD Set: Set time stamp, time show, camera name and name show in this interface.