User Manual
Table Of Contents
- Service Guarantee
- 1.Introduction
- 1.Installation
- 2.SD Card Slot
- 3.APP Download
- 5.Mobile APP CamHipro Connection
- 5.2 Connect to IP Camera Hot-Spot and then Configu
- 5.3 Add Camera
- 5.4 Wi-Fi Setting
- 5.5 Connect the Camera by Searching Nearby Devices
- 5.6 Mobile APP Function Introduction
- 5.6.1 Micro SD Card Video files playback and downl
- 5.6.2 Local files, device list and add new camera
- 5.6.3 Pre-set point and auto cruise (For PTZ)
- 5.6.4 Change password
- 5.6.5 Set factory default settings of the camera
- 5.6.6 Alarm management and notification
- 5.6.7 Motion Detection
- 5.6.9 FTP setting
- 5.6.10 Video and audio settings
- 5.6.11 SD card plan recording
- 5.6.12 Device time setting
- 5.6.13 SD card setting
- 6.Computer Browsing Access
- 7.Video Management Software (HIP2P Client)
- Frequently Asked Questions
- Check your connecting device:
- 35 -
7.1Software installation
You can download the software from our website (https://yoluke-tech.com) or you can insert the Mini CD
which comes in the package into your CD/DVD drive, then Install it on your computer.
Note: This program recognises the UID of the camera and not the IP of the camera. The IP of the camera is
used for access to the web
7.2 Add Camera
A
)
Open the software, click , to login, default password: leave it blank.
B) Click to Set an Area name (Such as: office / home / factory etc.
……
), you can also modify
and delete Areas as in the screenshot below.