35M70011-000 OWNER’S MANUAL by johnson controls AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION Thank you very much for purchasing our air conditioner. Please read this owner’s manual carefully before using your air conditioner.
Cautions 1. When replacing batteries, do not use old batteries or different type batteries. Otherwise it may cause the remote controller to malfunction. 2. If you do not use the remote controller for a few weeks or more, remove the batteries. Otherwise, battery leakage may damage the remote controller. 3. The average battery life during normal use is approximately half a year.
nt type batteries. n. more, remove the ote controller. y half a year. m the indoor unit s to light. and the receiver CONTENTS Specifications ..................................................................................................1 Features of remote controller ..........................................................................1 Indicators on remote controller ........................................................................3 Handling the remote controller ............................
Specifications Timer operat Model R91/BGE, R91/BGCE, R91A/BGE, R91/BGCE Rated Voltage 3.0V Lowest Voltage of CPU Emitting Signal 2.0V Reaching Distance 8m (when using 3.
Timer operation Set the starting & stopping time /BGE, R91/BGCE it gets 11m) 1. Push the TIMER ON button, the remote controller will show TIMER ON, the last set time for START operation and the signal “h” will be shown on the LCD display area. You are now ready to readjust the TIMER ON to start the operation. 2.
Timer operation Features of re TIMER ON button can set the auto-on time of the unit. TIMER OFF button can set the auto-off time of the unit. To set the starting time 1. Push the TIMER ON button, then the remote controller shows TIMER ON, the last set time for the starting operation and the signal “h” will be shown on the LCD DISPLAY area.
to-on time of the the auto-off time then the remote e last set time for signal “h” will be rea. You are now RT the operation. ain to set desired ere will be a oneremote controller onditioner. Then, econds, the signal mperature will re- and the remote F, the last set time the signal “h” will area. You are now TOP operation. ain to set the time ere will be a oneremote controller onditioner.
TEMP Button : Press the button to increase the indoor temperature setting. Z TEMP Button M : Press the button to decrease the indoor temperature setting. Cooling/Heat LOCK Button: Push this button to lock all the current settings, push again to cancel the LOCK function.
emperature setting. emperature setting. Cooling/Heating/Fan only operation ettings, push again ights when remote o the indoor unit. on mode. Including (Not applicable to nd back to AUTO. N/OFF button. gain to remove.
Automatic operation Handling the r When you set the air conditioner in AUTO mode, it will automatically select cooling, heating (cooling only type without), or fan only operation depending on what temperature you have selected and the room temperature.
Handling the remote controller in AUTO mode, oling, heating n only operation ure you have ure. ng mode, the d in the unit’s l start operating you simply push e controller. and power is dicator on the tarts flashing. CAUTIONS • Normally, set it • s off, push this ner. • e air conditioner. rtable, you can nually. de, you do not an speed will be Location of the remote controller • Keep the remote controller where its signals can reach the receiver of the indoor unit. (A distance of 8m is allowed.
www.johnsoncontrols.
