User Guide

ManualsBrandsYorkville Sound ManualsMonitorYorkville Sound YSMBT Active Studio Monitor

To get the full Owner’s Manual please visit our website at

http://www.yorkville.com/manuals/ or, if you need a printed version call 905-837-8777

Printed In China

QuickStart-YSM3BT-00-1v0 • YS#QSTART-YSM3BT • June 2, 2021

Connecting the speakers

Connect the active speaker and passive speaker with the included connecting cable (red cable to red

wire clamp, and black cable to the black).

The monitors have a variety of inputs for use with a multitude of devices. Soundcards or other devices

with RCA line outputs can be connected to the RCA inputs on your left speaker’s back panel. Professional

audio devices with balanced or unbalanced 1/4-inch outputs should be connected to the 1/4-inch TRS back

panel inputs. If your soundcard or portable music player has an 1/8-inch output, you can connect it to the

front panel aux input, using the provided 1/8-inch to 1/8-inch cable.

Connect to A.C. Power Outlet

Please connect the A.C. power plug to the correct A.C. voltage outlet. Before connecting power, please

make sure that the On/Off switch on the back is set to the off position.

Bluetooth Pairing

Perform the following steps to pair your mobile device with the speakers.

1. Flip the Power Switch on the real panel of the Master Speaker to the ON position. The LED

Power indicator on the front panel is on blue.

2. Press for 3 seconds the Bluetooth Pairing Button on the rear panel of the Master Speaker. The

LED indicator on the front panel will begin flashing, indicating that the speaker is in Bluetooth

pairing mode.

3. Open the Bluetooth setting on your mobile device, then scan for nearby Bluetooth devices.

4. Locate and select the YSM3BT entry. The LED indicator will remain illuminated is on white.

Indicating that the Bluetooth connection has been successfully made.

Note that the output of the speakers is the sum of all inputs. Unless you specifically

want to listen to a mix of different sources, only one audio input should be in active

use at a time.

ACTIVE STUDIO

MONITOR

QuickStart-YSM3BT-00-1v0.indd 1QuickStart-YSM3BT-00-1v0.indd 1 6/1/2021 3:40:20 PM6/1/2021 3:40:20 PM

Summary of content (4 pages)

PAGE 1
3 YSM BT ACTIVE STUDIO MONITOR Connecting the speakers Connect the active speaker and passive speaker with the included connecting cable (red cable to red wire clamp, and black cable to the black). The monitors have a variety of inputs for use with a multitude of devices. Soundcards or other devices with RCA line outputs can be connected to the RCA inputs on your left speaker’s back panel.
PAGE 2
3 YSM BT ACTIVE STUDIO MONITOR Raccordement des Enceintes Connectez le haut-parleur actif et le haut-parleur passif à l’aide du câble de connexion fourni (câble rouge au serre-fils rouge, et câble noir au noir). Les moniteurs sont équipés de plusieurs types d’entrées permettant une utilisation avec une multitude d’appareils. Les cartes de son ou autres appareils avec des sorties ligne RCA peuvent être connectés aux entrées RCA sur le panneau arrière de votre enceinte gauche.
PAGE 3
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
ISED Statement ‐ English: This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B). ‐ French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.