Instructions / Assembly

Page 7
Fig.6.3
Fig.6.5
Fig.6.1
Fig.6.2
Fig.6.4
1 Slide the canopy on the downrod(Fig.7) Thread the power leads from the fan
through the canopy and downrod. Take extra care not to pull on power wires. Damage
and loose connections could result from any abnormal pressure on these wires. Set
downrod into downrod collar yoke. Route until the holes match. Being careful not to
damage wiring, insert connector pin through the holes (See Fig. 7A. 7B). Secure the
pin by inserting the stop pin through the connector pin.
HANG DOWN STYLE
Fig.7
Fig.7A
Fig.7B