Use and Care Manual

3 | P a g e
LIGHT BULB REPLACEMENT_____________________________________________________
Yosemite Home Décor’s Electric fireplaces use Incandescent candelabra bulbs, rating voltage 120
volts, 40 Watt, E-12 small socket base light bulbs.
Changing Light Bulbs
Disconnect power supply before beginning any maintenance.
1. Light bulbs need to be replaced when you notice a dark section of the flame or when
clarity and detail of the coal effect disappears.
2. Unscrew the locking nut on the side of the brackets and then remove the face. This is
done by lifting the face up and swinging the face clear of the fire. Care should be taken
not to damage the face. Removal of the face may require two people.
3. On the base of the fire there are screws on both sides. These need to be removed to allow
the cover to slide down.