Use and Care Manual

4 | P a g e
4. Turn spring to loosen light bulb
5. Unscrew light bulb from socket
6. Replace with new light bulb
7. Place spring over new light bulb
8. Re-attach cover with screws
The replacement of the light bulb is complete.
WARNING
• Allow at least five minutes for the light bulbs to cool before touching the bulbs to avoid
burning. Make sure power supply is disconnected.
• Examine the bulbs to determine which one needs replacing. Remove the non working
bulb and replace with a new long life bulb. Hold the socket while unscrewing the old
bulb and while screwing in the replacement bulb.
• The 40 watt Incandescent candelabra bulbs are available at most hardware or Do it Your
Self or Lighting stores.
• Once the bulb has been replaced, replace the cover, screws and face.