Use and Care Manual

8 | P a g e
LIGHT BULB REPLACEMENT_____________________________________________________
1. Open the light bulb area:
The light bulb area is at the back of electric fireplace, see “E”. There are 6 screws on it.
Loosen the screw and then you can open it.
2. Examine the bulbs to determine which bulbs require replacement.
3. Remove the old bulb and replace a new one. Hold the socket while unscrewing or
screwing bulbs.
4. Re-place the access cover of the unit.
Bulb Requirement:
Light bulbs are 40 watts, 120 volts Candelabra with an E-12 small socket base.
There are quantity 2 or 3 bulbs required depends on the Electric fireplace you purchased.
Warning:
• Disconnect power before attempting any maintenance or cleaning to reduce the risk of
fire, damage or electric shock to persons.
• Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid burning
of skin.