Use and Care Manual

15 | P a g e
3. Follow the wires from the fan down to the heater. In many of our fireplaces they connect
below the light bulb. If this is the case, turn the spring that holds the light bulb into
place, and then unscrew the light bulb.
4. Unscrew the socket bracket that holds the light bulb in place.
5. Remove the fan wires that are connected to the heater. Replace with new fan and wires.
Run wires and fan to the location of where the fan was originally positioned.
6. Put socket bracket for light bulb back on.
7. Place light bulb back in socket. Close bottom cover of the firebox.
8. Once the new fan is in its proper position, screw the fasteners into their correct location
and fan will be securely stationed.
9. Replace screws to the top cover of the firebox and blower replacement is complete.