User's Guide

Table Of Contents

To conﬁgure a as the YoLink Relay

responder n on the relay using , tur

ON buon or via YoLink app (verify

t h e S t a t u s L E D o f Yo L i n k R e l ay

displays green). Press and hold the

SET buon for 5-10 seconds unl the

L E D q u i c k l y b l i n k s g r e e n , t h e n

release the buon

Upon pairing, the LED will stop blinking

(this may happen aer only blinking

two or three mes)

c. SET Buon

(5-10

seconds)

1. If you want to turn oﬀ the YoLink Relay when vibraon is detected, turn oﬀ the YoLink Relay ﬁrst ,

and let it enter pairing mode

2. For the same Vibraon Sensor and YoLink Relay, you can only choose to either turn on or turn oﬀ the

YoLink Relay when a vibraon is detected

Refer to the YoLink Relay

manual for more informaon:

YS5706-UC

YoLink Relay

b. Turn on

the relay