User's Guide

C-2. Add Device
Ta p “ ” bu  o n , th e n sc a n Q R
C o d e o n t h e d e v i c e . Fo l l o w t h e
ste p s t o a d d th e de v i c e
1
1. You will need to press the SET buon once again if the device failed to connect to the cloud
2. Pressing the SET buon at any other me aer this inial process will result in the LED blinking
red once, only. This indicates the device is connected to the cloud and is funconing normally
3. If the red LED does NOT blink as noted this may indicate a problem with the sensor. Please see
the troubleshoong secon and the contact secon for technical support
Press the SET buon (on front of
the device) once to turn on the
device. The Status LED will blink
re d o nc e , t he n gre e n s evera l
mes, indicang your device has
connected to the cloud and is
ready to use
2
5
SET Buon