YOU TUNE Adjustable Earplugs with Interchangeable Earphones USER MANUAL 1
You Control Your Sound Experience Table of contents Product and Accessories 4 Adjustable Noise Reduction Hearing Protection 6 You Tune Wireless and Wired Earphones 14 High Fidelity Music Filters 24 Interchangeable Advertising Inserts 30 Additional Silicone Tips 31 Warnings and Precautions 37 3
SELECT AN APPROPRIATE ADAPTER INSERT FOR YOUR LISTENING ENJOYMENT You Tune Silicone Earplugs are labeled for the Left and Right ear.
Noise Reduction Threaded Adapter Insert Properly insert the Universal Interchangeable Noise Reduction Threaded Adapter Insert for adjustable hearing protection up to 24 dB NRR 1: Position the flat edge on the Interchangeable Noise Reduction Threaded Adapter Insert with the flat edge of the You Tune Silicone Earplug. Rotate the Noise Reduction Filter to your desired level of noise reduction.
Interchangeable Adjustable Noise Reduction Filters Select the appropriate size Comply Premium Earphone Foam Noise Reduction Tip with a Threaded Core. Super soft foam Body-heat activated 3: Screw the Foam Tip onto the Threaded Insert until it is tight against the Silicone Earplug. 4: Insert the Interchangeable Adjustable Noise Reduction Filter into the Silicone Earplug.
Noise Reduction Correct Insertion of You Tune Earplugs In order to reduce risk of infection it is important that both of your hands and the hearing protection are clean before insertion into ears. Slowly roll the Foam Insert into a smaller cylinder. Try to avoid creases in the foam. Pull up and back on the top of your ear and and insert the corresponding Foam Tip and Silicone Earplug into your ear. Hold the earplug in your ear for 15-30 seconds until the foam fully expands.
Rotate the Noise Reduction Filter to your desired level of noise reduction. You Tune Earplugs allows you to adjust the amount of sound entering the ear canal without removing the device. Rotate the Noise Reduction Filter to your desired level of noise reduction. 0 dB 8 dB 16 dB Noise Reduction Adjustable Noise Reduction Hearing Protection 24 dB NRR Warning - Do not leave the filter in the closed position when not in use, it will cause damage the Noise Reduction Filter.
CTO Adapters Insert The CTO adapters are not required for earphone use, however properties of this adapter allow for better earphone music sound quality. 1: Position the flat edge on the CTO Adapter Insert with the flat edge of the You Tune Silicone Earplug. Earphones You Tune Wireless and Wired Earphones 2: Apply pressure until the insert is flush with the opening in the silicone earplug. A tight fit ensures users will be able to remove ear-tip connected to the adapter tip.
You Tune Wireless/Wired Earphones T-500 foam tips are not required for earphone use, however properties of this adapter allow for better You Tune earphones are specifically designed for the silicone earplug. Using different earphones will produce inferior sound quality and retention with the silicone earplugs. earphone music sound quality. Select the appropriate size Comply Premium Earphone Foam Music Tip. 3: Press fit your Foam Music Tip onto Universal CTO Music Adapter Insert.
Earphones Correct Insertion of You Tune Earplugs In order to reduce risk of infection it is important that both of your hands and the hearing protection are clean before insertion into ears. Slowly roll the Foam Insert into a smaller cylinder. Try to avoid creases in the foam. Pull up and back on the top of your ear and insert the corresponding Foam Tip and Silicone Earplug into your ear. Hold the earplug in your ear for 15-30 seconds until the foam fully expands.
You Tune Wireless Earphones Battery Unit Control your music experience right from the You Tune Wireless Earphone Control Box. Charge your earphones prior to using them. You Tune earphones support iOS Bluetooth battery level indicator. This feature indicates the battery status in the upper right corner of the screen when connected to iOS devices.
Controlling Calls Pair your You Tune Wireless Earphones with a Bluetooth enabled device. Pair your You Tune Wireless Earphones with a Bluetooth enabled device. 1: When the earphones are powered off, press and hold the Play button until you hear the words “Power On” and then “Pairing”. 2: The indicator light simultaneously flashes blue and red. Earphones Pairing You Tune Wireless Earphones Answering a call Press and hold the Play Button once to answer or end a call.
High-Fidelity Music Filter Adapter Tip High-Fidelity music filters allow for a flatter attenuation at all frequencies, which is preferred for live music or when hearing in noisy environments is crucial (music venues, marching bands, public transportation, restaurants) You Tune High-Fidelity music filters maintain the natural sound of music, but at safer lower levels. They available in three different Single Noise Attenuations Rating (SNR) filters.
You Tune High-Fidelity Music Filters Silicone music tips are required to achieve a flatter attenuation at all frequencies. You Tune accessories were specifically designed for the silicone earplug. Using different accessories will produce inferior sound quality. 3: Press fit your Universal Re-Usable Silicone Music Ear Tip onto Universal High-Fidelity Music Filter Adapter Tip. 5: Insert your High-Fidelity Music Filter into the Silicone Pressor.
Music Filters Correct Insertion of You Tune High-Fidelity Earplugs In order to reduce risk of infection it is important that both of your hands and the hearing protection are clean before insertion into ears. To ease insertion, pull the top of the ear outward and upward and insert the corresponding Universal Reusable Ear Tip into the ear canal.
Additional Silicone Tip Usage The Interchangable Advertising Inserrts can be used to customize your You Tune Earplugs. Select the appropriate size Silicone Ear tip. 1: Insert the “right” and “left” Advertising Insert to the corresponding Silicone Earplug. Information on advertising insert can be found at youtune.us 1: Press fit your Silicone Ear Tip onto Universal CTO Music Adapter Insert.
A PL In Partnership With DE EAR MA I N ROU DL S P Y U G T H E US © 2017 Hearing Components. Comply is a egistered trademark of Hearing Components Hold the right earplug with your right hand. Open the right ear canal using your left hand to pull up and back your right ear. Using your right hand, insert the earplug into your ear canal, to the extent as you are comfortable and hold for 15 seconds . Repeat for the opposite side.
In Partnership With You Tune’s filtered acoustic solutions were co-developed by Dynamic Ear Company, market leaders in the development of acoustic filters, ambient sound and personal audio solutions.
IMPORTANT SAFETY INFORMATION - Exposure to Noise Levels at or above 85 dB can cause hearing loss. Monitor your hearing protection and earphones usage. To avoid damage to your hearing system protect your ears in the presence of loud noises and use your earphones at a safe volume. - Always ensure the volume of your music player is turned down before connecting to you earphones. Gradually increase the volume of your earphones until you reach a comfortable listening level.
The verified 24 dB NRR is only using the You Tune Earplugs with the Noise Reduction Threaded Adapter Noise Reduction Rating 24 Inserts and Comply Premium Earphone Foam Noise Reduction Tips. Improper fit and use of this device will reduce its effectiveness in noise reduction. Please refer to the enclosed instruction for a proper fit.
Thank You For Your Purchase For more information and additional accessories visit youtune.
youtune.
