Operator's Manual

Operator Manual – Prodigy Sleep System
Revision: 04; CCRF-625
Effective Date: 30-Jan-19
Document Number: YST-UDoc-PR2-001-04
21 of 61
CAUTION
Ensure the table surface area is level, clean and dry. Avoid placing objects that contain
liquids such as glasses of water near the Prodigy Sleep System TTU to prevent possible
spillage and equipment damage or electric shock.
CAUTION
Keep away from heat sources such as electric heaters, radiators, fireplaces, or other
sources of heat. Excessive heat may cause overheating and loss of functionality.
Plug the TTU power supply into the wall outlet using the correct adapter, and then into the bottom of
the TTU.
The TTU is equipped with a light sensor to detect when the room is dark during the sleep study. Keep
the TTU away from light sources during the study (e.g. sunlight, lamps, etc.). The TTU is also equipped
with a sound level sensor that can detect audible snoring sounds. Keep the TTU away from sources of
noise (e.g. fans, speakers, etc.) and sources of blocking the TTU audio recording (i.e. paper, books, etc.)
CHARGING THE DEVICES
Charging the CMU
1. To charge the CMU, connect the USB-C adaptor to the charging port on the CMU and plug the
wall adapter into a power outlet.
2. Once the device is connected to the charger and plugged in, the LED light around the power
button will immediately turn white, and remain white for several seconds and will output the
charging status.
a. Purple indicates charging
b. Green indicates charged
c. Yellow or Red – refer to troubleshooting section
3. Charging should take no more than 3 hours.
CAUTION
Do not leave the CMU charging for extended periods of time.
WARNING
Do not use the CMU while it is charging.
UNCONTROLLED COPY - SGS - 30-JAN-19