Operator's Manual
Table Of Contents
- Warning, Caution, and Note Statements
- 1. Introduction
- 2. System Overview
- 3. Instructions for Use
- 4. User Setup
- 5. Re-Processing
- 6. Troubleshooting
- 7. Technical Description
- 8. Appendices
Operator Manual – Prodigy Sleep System
Revision: 04; CCRF-625
Effective Date: 30-Jan-19
Document Number: YST-UDoc-PR2-001-04
32 of 61
Step 5: Connect the cables to the Prodigy CMU.
→ With your shirt on, connect the chest, legs, and effort belt cables to the CMU as shown below.
→ Push the connectors firmly into the CMU to ensure the connection is secure.
Each leg has two connectors to attach to the CMU, It does not matter which connector goes in the
bottom connector and which connector goes above the bottom connector. Left leg connectors go in
the left side of the CMU, right leg connectors go on the right side (see diagram below).
.
→ Coil excess slack from the leg cable leads and secure with the provided medical tape.
UNCONTROLLED COPY - SGS - 30-JAN-19