Operator's Manual

Operator Manual – Prodigy Sleep System
Revision: 04; CCRF-625
Effective Date: 30-Jan-19
Document Number: YST-UDoc-PR2-001-04
40 of 61
CAUTION
Wear personal protective equipment while reprocessing the device. Failure to wear
personal protective equipment may result in contamination of the service personnel
from the soiled components.
PRE-CLEANING
Promptly after use the HMU, CMU, TTU, and power supply shall be pre-cleaned. Pre-cleaning prevents
soil from drying on the devices, which makes them easier to clean.
Wear protective disposable gloves and a mask during the pre-cleaning procedure. Ensure that both the
Prodigy Sleep System HMU, CMU and TTU are powered off. Furthermore, disconnect the power
supplies from the TTU before pre-cleaning.
Moisten a soft cloth with warm water and mild detergent and thoroughly wipe the HMU, CMU, and
power supply outside surfaces. Also wipe down the packaging case surfaces, handle, and any other
accessible surfaces that may have been soiled. Thoroughly wipe the components with a soft cloth
moistened with clean fresh water to remove all traces of cleaning solution. Once all traces of cleaning
solution are removed, dry the components with a dry cloth.
CAUTION
Do not apply liquids to the device or submerge the device in water or other liquids.
Device is not rated for submersion in liquids and may lead to fluid ingress, equipment
damage or electric shock.
CLEANING
Cleaning is a process that involves the physical removal of foreign material, e.g. dust, soil, organic
material such as excretions. Cleaning physically removes this material with water, detergents, and
mechanical action. Cleaning is essential prior to disinfection.
Third-party medical devices should be cleaned per the manufacturer’s instructions.
UNCONTROLLED COPY - SGS - 30-JAN-19