Operator's Manual
Table Of Contents
- Warning, Caution, and Note Statements
- 1. Introduction
- 2. System Overview
- 3. Instructions for Use
- 4. User Setup
- 5. Re-Processing
- 6. Troubleshooting
- 7. Technical Description
- 8. Appendices
Operator Manual – Prodigy Sleep System
Revision: 04; CCRF-625
Effective Date: 30-Jan-19
Document Number: YST-UDoc-PR2-001-04
28 of 61
HMU Only
Figure 11 - HMU Only PSG Configuration
FREQUENTLY USED FUNCTIONS
• Plugging or removing the power supply from the wall outlet, as well as the back of the TTU.
• Plugging or removing the power supply from the wall outlet, as well as the bottom of the CMU.
• Plugging or removing the power supply from the wall outlet, as well as the back of the HMU.
• Turning the TTU on or off by pressing the power switch button.
• Touching the TTU screen to set up the study, start the study, and end the study.
• Snapping or plugging in the EEG and EMG electrodes into or out of the CMU.
• Plugging in the EKG and EMG electrodes into or out of the HMU
• Applying or removing EEG, EKG and EMG electrodes from your face, body and legs.
• Turning the CMU on or off by pressing the power button.
• Turning the HMU on or off by pressing the power button.
WARNING
Do not perform service or maintenance on this device while in use.
CAUTION
When turning on the devices by pressing the power button, if the LED does not turn
BLUE, please consult the troubleshooting section.
CAUTION
Remove the HMU & CMU before defribulation, as the discharge of a defribulator on a
user may damage the device.
UNCONTROLLED COPY - SGS - 30-JAN-19