Operator's Manual

Operator Manual – Prodigy Sleep System
Revision: 04; CCRF-625
Effective Date: 30-Jan-19
Document Number: YST-UDoc-PR2-001-04
36 of 61
Step 1: Setup the TTU.
→ Plug the micro USB cord into the USB power adapter and connect to the TTU.
→ Plug the wall power adapter into an outlet making sure the TTU is within arm’s reach from the edge
of your bed.
→ Turn on the Prodigy HMU and CMU by pressing the center power button and holding for five
seconds (the blue light indicates the unit is on).
→ Tap the TTU’s screen until it wakes from the black screen, then follow the prompts to start your
study.
→ The TTU will automatically check your sensors and identify if there are any problems with the
connections.
→ Press “Start Study”. You are now already to sleep!
During the night
Sleep in any position that is comfortable to you. It is fine to lie on the wires, but avoid applying too
much pressure on the Prodigy HMU and CMU.
The study will not be interrupted if you get out of bed during the night. If you need to get up during the
night, the equipment needs to be left on. When you return to your bed the devices will automatically
continue to record. Do not turn off the devices unless you want to end the study.
Ending the study
When you are ready to stop the study, tap the TTU screen unit it wakes from the black screen and
follow the prompts.
After selecting “stop study” on the TTU, press and hold the On/Off Button on the Prodigy HMU and
CMU for five seconds to turn off the devices.
Returning the equipment
The following items need to be returned:
Prodigy HMU Prodigy CMU TTU Wrist Pulse Oximeter
Finger Sensor
Effort Belts
(2x)
Dual Connector
Effort Belt
Cables (2x)
Single Snap Lead Cables
for Chest (5x)
Dual Snap Lead Cables
for Legs (2x)
USB Wall Adapter
with micro USB Cable
USB Wall Adapter
with USB-C Cable (2x)
Any unused
sensors,
medical tape,
and alcohol
swabs
UNCONTROLLED COPY - SGS - 30-JAN-19