User's Manual

ManualsBrandsYoungshin Electronics ManualsAutomotiveTwo Way Car Alarm System

M4200 Controllers

Installation Guide

M4200

Installation GUIDE

M4200

By Youngshin Electronics Co., Ltd.

www.magicar.com

IC : 3767B-MA580

Statement : The term "IC:" before the radio certification number only signifies that Industry Canada

technical specifications were met.

Caution :

he User that modifications to the unit may void the user's authority to operate the unit.

FCC ID : O44JMA580

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions :

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Caution :

Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this device.

Summary of content (11 pages)

PAGE 1
Installation Guide M4200 Controllers M4200 www.magicar.com FCC ID : O44JMA580 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution : Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.
PAGE 2
Description of Remote Appearance Safety Information Please take these safety precautions into consideration under the following conditions: The model name, 2WAMR, stands for 2 Way 4 Button Remote. 1. Servicing the vehicle When servicing your automobile (i.e. changing the oil, washing your car), the Young Shin Electronics, Inc system should be in Valet Mode. There is a safety shutdown switch underthe hood that deactivates the remote starter function if the hood is open.
PAGE 3
LCD Icons Icon Remote-Pager Button Functions Explanation Indicates if Timer Mode is on or off. Indicates if Turbo Start Mode is on or off. Indicates if Passive Arming Mode is on or off. Button PressedFor I, I- 1/2 sec 1/2 sec 1/2 sec 1/2 sec 2 sec 2 sec 2 sec 1/2 sec 1/2 sec 1/2 sec 1/2 sec AUX 1 AUX 2 Query Function Auto-start Function – on/off Trunk Release Panic, Press I to shut off Siren.
PAGE 4
Wiring Diagram Page 5 Page 6
PAGE 5
Notes for Wire Connection Pin #1 : Red This wire is used as the (+)Constant Power input for the unit. This wire must be connected for the unit to function correctly. Pin #2 : Green/ White This wire is the (+)Positive Parking light output. Connect this wire directly to the (+) trigger wire generally off the parking light switch or found at or behind the fuse box. Pin #3 : Red/ White This wire is used as the (+)Constant Power input for Starter and 2nd Ignition.
PAGE 6
(generally you will have to change the polarity with a relay) will simulate the door opening 0.5 seconds before the lock pulse, and will keep the simulated door open until 0.5 seconds after the lock pulse has ended. Pin #6 : Orange/White This is the Disarm wire. It provides you with a (-) pulse when disarmed and before remote start. Pin #4 : Violet/ Black This wire is the (-) trigger input, which may be connected to a trunk pin or trunk trigger as a buyer option.
PAGE 7
Error Number (# of times parking lights flash) Tach Learning Error Diagnosis 1 Dip Switch #1 is on alternator sensing. 2 Manual Car Key is in the off position. 3 No signal or the signal is not fast enough. find a different wire. Please note that this feature requires more advanced installation. Please call Technical Support for details. Pin #4 : Blue This wire is a (-) 200mA Unlock Output. Pin #5 : Blue/Black This wire is a (-) 200mA Lock Output. Pin #6 : No Conncetion Alternator Sensing 1.
PAGE 8
: This is used for setting run time. If the switch is set to the OFF position then the run time is set for 15 min for gas engines or 25 min for diesel engines. If set to the ON position then the run time is set to 25 min for gas engines or 45 min for diesel engines. Switch #2 Jumper Wire : This jumper is connected when you receive the brain. While the jumper is connected the module is set for manual transmission mode. When installing on automatic transmissions the jumper must be cut.
PAGE 9
Installation of AM Antennas The antennas have been calibrated for horizontal installation at the left-top corner of the windshield. Different installation may adversely affect the transmitting distance. Step3: Within 4 seconds after you released the switch, press and release PS for the number of times of the option number you want to change. Step4: Within 2 seconds, the LED and Parking Lights will flash the same number of times as you pressed the switch at step 3.
PAGE 10
Option Programming for Six Button Remotes Note : The procedures will be same as the 4 button remotes except the use of the different buttons.
PAGE 11
Programming Menu #2 Diagnosing Problems with Auto-Start Feature Factory Default Optional OFF ON 2-2 Cold Start with Temp Sensor Timer Start or Minimum Interval between Cold Starts 3 Hr 1.5Hr 2-3 N/A 2-4 N/A 2-5 Ignition Controlled Door Lock 2-6 N/A 2-7 N/A 2-8 N/A 2-9 N/A 2-10 N/A 2-1 OFF ON If there is a problem in auto-starting your car, you will see three flashes of the parking lights when you attempt to auto-start the car.