User Manual

Temperature makes a horrible in-car environment.
Please pay attention to the safety of pets and babies.
70°F
80°F
90°F
100°F
104°F
114°F
124°F
134°F
113°F
123°F
133°F
143°F
OUTSIDE TEMP 30MIN 60MIN
Car temps over time:
Air Vent Mount
Suction Cup
Ball Joint
Vent Clamp
Cradle Knob
Bracket
Silicone Pad
Ball Joint
Telescopic Arm
Angle
Adjustment Knob
Suction Cup
Suction Cup Lock
Length
Adjustment Knob
Product Diagram
Silicone Pad
Bottom Tray
Grip Nut
Clamp Arm
Release Button
Package Contents
Note:
If the suction cup is loose, please wash the
suction cup and wait for it dry, install it again.
If the vent clamp is loose, please reinstall it.
Suction Cup Air Vent Holder
1 2
Wet
Wipes Wipes
Dry
WipesCable Clips
Bracket
5.1 The local road conditions, temperature,
and the severity of ultraviolet rays.
5.2 The depth of the texture and slope of
the surface.
1.The correct installation procedure:
1.1 Choose a flat surface
1.2 Wipe the surface and wait for it to dry
1.3
Tear off the plastic film on the suction cup
1.4 Press the suction cup on the dashboard
for 4 seconds, then press the suction
cup lock at the 3rd second.
2.It is recommended to use the vent clamp
holder,below these situations:
2.1 The surface texture of the dashboard
has too deep lines or the slope is too big.
2.2 The dashboard is leather surface,
breathable surface, curved surface, plush
cloth surface, uneven surface.
2.3 The temperature outside the car is over
104℉/40 ℃,which cause the temperature
inside the car to be over 203℉/95 ℃.
3.The weight of your phone and the habit of
using the mount, like the arm length you
prefer.
4.High temperature and strong ultraviolet
rays will accelerate the aging of the mount,
please clean the suction cup to restore vitality.
5.When the vehicle is regularly maintained,
please check the stability of the mount,
which depends on:
Frequent Q&A:
How to avoid the mount falling down？
We are committed to launching high-quality
products to customers.If you have any
questions, please feel free to contact us.
Your question will be answered within
24 hours.
1.Please install the product under the
instruction of this manual.
2.Attention: Please pay attention to maintain
a clear vision after placing the product.
3.Do not cover the airbag when installing the
product.
4.When checking the car regularly, please
also check the stability of the phone holder
suction cup.
5.
Please join the YRU CEO (Chief Experience
Officer) team to upgrade and experience
better products.
6.The temperature outside the car is
104℉/40 ℃.After 30 min, the temperature
inside the car is 203℉/95 ℃. Please pay
attention to the safety of pets and babies.
Kind Reminders & Tips:
YRU Customer Service Support:
E-mail: [e-mail]
Website: www.yrulife.com
For Your Driving Safety