Owner's manual

Logging Section 9
YSI Incorporated YSI 556 MPS
Page 73
OR Use the arrow keys to highlight the Start logging
selection on the run screen if a data stream is being logged.
Figure 9.9 Run Screen
3. Press the Enter key. The Enter information screen is
displayed.
Figure 9.10 Enter Information Screen
NOTE: The last filename used will be displayed.
4. Use the keypad to enter a file name. Refer to Section 2.9
Keypad Use.
NOTE: The instrument will assign a default file name of
NONAME if no file name is specified.
5. Press the Enter key to input the file name.