Instruction Manual

System 182 Installation

3 - 7

ba76024e01 02/2012

Premounting the ISO

blind nuts

Fig. 3-3 Premounting the ISO blind nuts (variant 1)

4 Attach the contact base (pos. 5 in Fig. 3-2) on the Universal

Transmitter with the two plastic tapping screws (pos. 6).

5 On the Universal Transmitter, remove the two countersunk

screws (pos. 7 in Fig. 3-2) and swing open the lid.

6 Insert the cheese-head screws (pos. 8 in Fig. 3-3) with the

plastic washers in the drilled mounting holes in the enclosure

and loosely screw in the ISO blind nuts (pos. 9).

DIQ/S 182-PR