Instruction Manual

System 182 Installation

3 - 23

ba76024e01 02/2012

Mounting the Universal

Transmitter in the panel

Fig. 3-20 Mounting the Universal Transmitter in the panel

1 Insert the Universal Transmitter in the panel aperture from the

front.

2 Slightly unscrew the screws (pos. 2 and 3) of the two angle

brackets (pos. 1 in Fig. 3-20), but do not remove them.

3 Push in the two angle brackets - as shown in Fig. 3-20 - into

the lateral guides of the Universal Transmitter up to the stop.

4 Tighten the screws (pos. 2).

5 Screw in the screws (pos. 3) until the screws rest snugly

against the panel.

or sta

ck m

oun

tin

ove

lab

insta

ll con

ct carrier