Instruction Manual

Installation System 182

3 - 24

ba76024e01 02/2012

3.5.4 Top hat rail mounting

Materials required  THS/IQ kit for top hat rail mounting (see chapter 12 A

CCESSORIES

AND OPTIONS).

Tools  Phillips screwdriver.

Mounting the Universal

Transmitter on a top hat

rail

Fig. 3-21 Mounting the Universal Transmitter on a top hat rail

1 Screw the clamping assembly (pos. 1 in Fig. 3-21) onto the

back of the Universal Transmitter with the two plastic tapping

screws (pos. 2).

2 Attach the Universal Transmitter onto the top hat rail from

above using the clamping assembly and press against the rail

until the clamping assembly clicks into place. The Universal

Transmitter can be moved sideways afterwards.

3 To unhook the Universal Transmitter, press it downward and

pull it forward at the bottom.

r sta

ck m

nting

rem

ove

lab

insta

ll co

tact ca

rrier