Owner's manual

System 182 XT-4 Installation
3 - 1
ba76027e01 02/2012
3 Installation
Note
How to connect the DIQ/S 182 XT-4-PR to the PROFIBUS master is
described in detail in the chapter 7 PROFIBUS
CONNECTION.
3.1 Scope of delivery
The following parts are included in the scope of delivery of the DIQ/
S 182 XT-4-PR:
 DIQ/S 182 XT-4-PR with attached MIQ/JB branching module
 Accessory kit with:
– Contact carrier with screws
– ISO cap nuts with screws and ring washers
– Cable glands with sealing gaskets
 Operating manual.
3.2 Requirements of the measurement location
The measurement location must meet the environmental conditions
specified in section 10.1.