Owner's manual

System 182 XT-4 Installation

3 - 15

ba76027e01 02/2012

3.6.3 Variant 2: stack expansion backwards

Preparing the stack

mounting

Fig. 3-7 Preparing the MIQ modules for stack mounting (variant 2)

Mounting the contact

base

Fig. 3-8 Mounting the contact base (variant 2)

1 Remove the covers from the drilled mounting holes (pos. 1 and

3 in Fig. 3-7).

2 Remove the contact cover (pos. 2).

3 Pull off the adhesive label (pos. 4).

4 On the MIQ module, remove the two countersunk screws (pos.

5) and swing open the module lid.

For stack mounting remove label

and install contact carrier

MIQ module

DIQ/S 182 XT-4-PR