Owner's manual

Installation System 182 XT-4

3 - 16

ba76027e01 02/2012

Note

Only use the plastic tapping screws supplied for attaching the contact

base. They ensure the correct fit.

Premounting the ISO

blind nuts

Fig. 3-9 Premounting the ISO blind nuts (variant 2)

5 Fix the contact base (pos. 6 in Fig. 3-8) onto the DIQ/S 182 XT-

4-PR with the two plastic self-tapping screws (pos. 7).

6 Insert the cheese-head screws (pos. 8 in Fig. 3-9) with the

plastic washers in the drilled mounting holes in the module lid

and loosely screw in the ISO blind nuts (pos. 9).

MIQ module