Manualshelf

Owner's manual

ManualsBrandsYSI ManualsEquipmentDIQ/S 182 XT-4-PR
31323334353637383940
System 182 XT-4 Installation
3 - 17
ba76027e01 02/2012
Stacking the
MIQ modules
Fig. 3-10 Stacking the MIQ modules (variant 2)
Fig. 3-11 Closing the enclosure (variant 2)
7 Attach the prepared MIQ module to the back of the DIQ/
S 182 XT-4-PR. At the same time, ensure that the two clips on
the DIQ/S 182 XT-4-PR click into place in the lid of the
MIQ module. Subsequently, tighten the two screws (pos. 8 in
Fig. 3-9).
8 Close the MIQ module and fix it with the two countersunk
screws (pos. 5 in Fig. 3-11).
5