Owner's manual

System 182 XT-4 Installation

3 - 25

ba76027e01 02/2012

chapters. MIQ modules are mounted in the same way.

3.7.2 Mounting on a mounting stand with the SSH/IQ sun shield

Materials required  SSH/IQ sun shield (see chapter 12 A

CCESSORIES AND OPTIONS).

Tools  4 mm set screw wrench

 Phillips screwdriver.

Mounting the sun shield

on a mounting stand

Fig. 3-15 Mounting the SSH/IQ sun shield on a mounting stand

1 Screw the sun shield (pos. 1 in Fig. 3-15) with the four

hexsocket head screws (pos. 2), the washers (pos. 3) and the

clamps (pos. 4) at the required height on the mounting stand

from the back.