Owner's manual

System 182 XT-4 Installation
3 - 29
ba76027e01 02/2012
Fig. 3-20 Mounting DIQ/S 182 Universal Transmitter in switch panel
3 Slightly unscrew the screws (pos. 2 and 3) of the two angle
brackets (pos. 1 in Fig. 3-20), but do not remove them.
4 Push in the two angle brackets - as shown in Fig. 3-20 - into
the lateral guides of the Universal Transmitter up to the stop.
5 Tighten the screws (pos. 2).
6 Screw in the screws (pos. 3) until the screws rest snugly
against the panel.
7 Screw the DIQ/CR3 combi output module onto the DIQ/S 182
Universal Transmitter.
F
or s
ta
ck m
oun
tin
g
re
m
o
ve
labe
l
a
nd in
sta
ll con
ta
ct ca
rrie
r
1
2
3
3
2