User Manual

4110 General information

ba76137e01 03/2013

General information

Automatic sensor

recognition

The sensor electronics with the stored sensor data is in the connecting head

of the electrode. The data include, among other things, the sensor type and

series number. With each calibration, the calibration data is written in the

sensor and the calibration history is recorded. The data is recalled by the

meter when the sensor is connected and is used for measurement and for

measured value documentation. Storing the calibration data in the sensor

ensures that the correct slope and asymmetry are automatically used if the

sensor is operated with several meters.

The digital transmission technique guarantees the failure-free communi-

cation with the meter even with long connection cables. If the sensor firmware

is enhanced by YSI, it can be updated via the meter.

Technical Data

General data

Measurement and application characteristics

Model Reference

elektrolyte

Junction NTC Special fatures

4110 Gel Fiber Yes Plastic shaft

4110-3 Gel Fiber Yes Plastic shaft

Model pH measuring

range

Allowed

temperature

range

Membrane

resistance at

25 °C

Typical

application

4110 0.000 ... 14.000 0 ... 80 °C < 1 GOhm Field

4110-3 0.000 ... 14.000 0 ... 80 °C < 1 GOhm Field