Model No.:1109 Ceiling Fan Installation Instructions THANK YOU We appreciate the trust and confidence you have placed in us through the purchase of this ceiling fan.We strive to continually create quality products designed to enhance your home.
Table of contents Table of contents 1 Safety Precautions 2 Warranty 3 Pre-Installation Tools needed 3 Installation kit 4 Blade balancing kit 4 Specification 5 Installation Step 1(Basic assembly of the fan) 6 Step 2 (Ceiling bracket installation ) 8 Step 3 (Receiver and wiring installation) 10 Step 4 (Light kit and blades installation) 11 Step 5(Switch on and ceiling fan works) 12 Remote Control ( Emitter ) Operation 13 TroubleShooting 14 Balancing 15 .1. Visit www.pmwfan.
Safety Precautions The information contained in the following pages has been prepared to ensure your maximum enjoyment of your fan Please remove the fuse or turn off the circuit breaker to cut off the power before installing the fan. Ensure all electrical connections are in compliance with local laws, regulations and national eletrical codes. If you are not familiar with electrical installation and wiring, please hire a qualified electrician or consult the wiring manual. 1.
Warranty The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturer warrants the light kit (excluding any glass), to be free from defects in workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser.
Pre-Installation Installation kit AA Part AA BB CC DD BB CC Description Blade attachment screw with lock washer Wire nut Screws A Screws B Blade balancing kit .4. Visit www.pmwfan.com for further assistance.
Pre-Installation Specification F A G H B I J C D K E AAA 1.5V L Part M Description N Quantity Quantity Part A Bracket 1 I Blades B Down rod 2 J C Canopy 1 D Yoke cover 1 K L Spare power cable Spare safety rope Receptor 1 E Body/motor 1 Light kit 1 Remote control Battery 1 F M N G H Light cover Blades connector 1 8 Description .5. Visit www.pmwfan.com for further assistance.
Installation Instruction Step 1(Basic assembly of the fan) ① Decompose Down rod. Importance:If you are going to use a long down rod, follow these steps. 1.Connecting the Spare Power Cable .6. Visit www.pmwfan.com for further assistance.
Installation Instruction 2.Connecting the Spare Safety rope ② Pass the cable through the down rod and lock the down rod. ③ Install the Yoke cover and Canopy. Then insert the fixing pin, push the Hanging ball up, and fix it with screws. screw OK .7. Visit www.pmwfan.com for further assistance.
Installation Instruction ④ Connect Blades with Blades connector THIS SIDE UP Step 2 (Ceiling bracket installation and fan into the installed Bracket.) ① Turn off the fan power supply at the circuit breaker box and the wall switch. OFF ② Can be installed on <10º sloped roof. Choose the following installation methods according to the actual situation of the roof. ACCEPTABLE FOR FAN SUPPORT Electrical Outlet Box .8. Visit www.pmwfan.com for further assistance.
Installation Instruction or Solid wood roof ③ Snap the basically assembled fan into the installed Bracket. Click! buckle Safety rope installation method Safety rope .9. Visit www.pmwfan.com for further assistance.
Installation Instruction Step 3 (Receiver and wiring installation) ① Connect the wires according to the polarity (the color of the House power cord may be different if the color is the same). House power AC IN L(Black) AC IN N(White) To Light ② To Motor ③ Put the receiver into the Bracket and arrange the wires Adjust the position of Canopy, then lock it .10. Visit www.pmwfan.com for further assistance.
Installation Instruction Step 4 (Blades and Light kit installation) ① Align the connected blade with the mounting hole, and then fix it with screws. ② Remove the pre-installed screws. Connect the light kit cable, and then lock the light kit. Insert .11. Visit www.pmwfan.com for further assistance.
Installation Instruction ③ Installation of light cover. Step 5(Switch on and ceiling fan works) ON .12. Visit www.pmwfan.com for further assistance.
Remote Control ( Emitter ) Operation Transmitter learning process 1.Insert the 2 pcs of batteries (provided) into transmitter. 2.Turn on the power supply to the fan. Within 10 sec, press and hold the “1” and “2” button for about 3 sec. Once the receiver has detected the frequency, receiver will “Beep Beep” twice.Programming process is completed and fan is ready to use. Press and hold for about 3 sec If the fan is not responding to the transmitter, Repeat transmitter learning process.
TroubleShooting WARNING: Make sure the power is off at the electrical panel box before you attempt any repairs. Problem The fan will not start. The fan sounds noisy. The remote control is not working. Solution □ Check the main and branch circuit fuses or breakers. □ Check the line wire connections to the fan and switch wire connections in the switch housing. □ Check to make sure the frequency switches from the remote control and receiver are set to the same frequency.
Balancing – Wobbling problems during fan operation If the fan body wobbles during its operation, this is not a sign of malfunctioning (even if it wobbles a few centimeters). To reduce wobbling, you can turn off the fan,and: 1.Check that all blades are properly fastened by tightening their screws. 2.Check the distance between each blade and the ceiling. Measurements to the ceiling can be carried out as shown in the following diagram.
Questions, problems, missing parts? Before returning to the store, visit www.pmwfan.com for further assistance. Retain this manual for future use.
