Installation Guide

.12.
Remote Control ( Emitter ) Operation
1. Please check whether the battery is
installed correctly and whether it is
charged. If necessary, replace the
remote control battery.
2. Please check if there are similar
remote control products working nearby,
because remote control products of the
same frequency will interfere with each
other.
3.Repeat transmitter learning process.
1.Insert the 2 pcs of batteries (provided)
into transmitter.
2.Turn on the power supply to the fan.
Within 10 sec, press and hold the “1”
and “2” button for 3 sec. Once the
receiver has detected the frequency,
transmitter will “Beep Beep” twice.Pro-
gramming process is completed and fan
is ready to use.
If emitter can not
control the fan
Transmitter learning
process
Transmitter FunctionRemote Control Holder
Installation
②
③
⑤
⑥
④
①
AAA 1.5V
3
4
5
6
1
2
1H 3H
6H
Z
Z
Z
Fan Speed
(1/2/3/4/5/6)
Fan Off
Fan Timer Switch
(1hr,3hr,6hr)
Sleep Wind
Forward/Reverse
LED On/Off
Colour Change
Natural Wind