User's Manual
English
21
Recovery Solution (AMI Rescue) Guide
As an image-based OS recovery solution, it recovers to the initial status of shipment from factory when HDD of user cannot
be booted from OS or it has problems.
Execution of Recovery Solution (AMI Rescue)
If viliv logo appears when booting the system (BIOS POST),
press the F10 key 1-2 times.
As the logo disappears, Pre-Boot Menu window appears.
ⷀ In order to use F10 key in N5, press F10 key while pressing the
Fn key on the lower right side of the keyboard.
Pre-Boot Menu
When selecting Normal Boot, booting proceeds to Windows.
For recovering OS, select AMI Rescue and click Launch
Service.
AMI Rescue Lite-Wizard appears.
AMI Rescue Lite-Wizard
When clicking Restore OS button, a message that conrms
the recovery of OS is displayed. If you press Yes (Y), it starts
the recovery of OS.
If the process of OS recovery is completed, a message that
conrms the successful recovery is displayed.
(Partition 0 on disk 0 was successfully restored.)
If you press OK button, the system is booted again
automatically.
Now, if you boot to Windows, OS will be in the initial status of
shipment from factory.
When recovering OS, recover by connecting battery adaptor.
Since data is deleted in case of recovery, make sure to back up the data beforehand.
Please wait for 20 sec when black screen is showing to prepare boot up the Windows 7.
It will take more time for Windows 7 users.
Notice
Way to Use Recovery Solution (AMI Rescue)