User's Guide

 Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.

 To disable Wi-Fi, tap the slider again .

4. Tap a Wi-Fi network to connect, enter the password (if it’s not an open network), and then tap

Connect.

 Your tablet is connected to the Wi-Fi network. You will see ( ) in the status bar.

 The password, for a household wireless LAN router, is sometimes found on a sticker on the

router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For

password for a public wireless LAN, check with user's service provider.

 Entering a password is not required if an access point is not security protected.

Note: The next time your tablet connects to a previously accessed secured wireless network, you will not

be prompted to enter the password again, unless you reset your tablet to its factory default settings or you

instruct the tablet to forget the network.

Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for your tablet

to connect to a Wi-Fi network. It may be necessary to provide a user name and password for certain

closed wireless networks.

Disconnect Wi-Fi

You may wish to disconnect from a connected Wi-Fi network without turning Wi-Fi off.

1. From home, swipe up and tap Settings .

2. Tap Network & internet > Wi-Fi.

 The Wi-Fi settings menu appears.