Users Manual

Green Blinking :
Ready to charge
Red Blinking:
Charging
Solid Green:
Charge Completed
Blue Blinking / Solid:
Error
Notice: The batteries are a consumable material and that they have to be replaced after they
show weakness.
Notice: Voltage for a long time storage shall be 14.4V~15.6V range. Full charged storage is
prohibited
Charge the ST16E battery
Charge the ST16E battery by using supplied USB cable and inserting it into the USB port on the
charger. It will take approximately five hours to charge a fully discharged battery.
NOTICE: To check the charge status of the ST16E, simply tap the screen twice.