Operation Manual

ISSUE
Q500 will not inialize
Flight baery will not
charge (red LED on
charger glows solid red).
Q500 GPS will not lock
(ST10 indicates GPS
Disabled)
Q500 GPS has reduced
precision
Q500 GPS funcons not
operang properly
POSSIBLE CAUSE
‘Compass error’ is indicated by the LED.
Q500 is in No Fly Zone.
Q500 is above 8,000 feet above MSL.
Incorrect motor start up procedure.
Q500 is too close to a metal object or metal surface .
Compass needs to be calibrated .
EMERGENCY Mode. Possibly due to obstructed propel-
ler during motor start up.
Weak GPS signal.
U.S. Government has raised threat level.
Vibraon levels high, indicated by shaky landing gear.
SOLUTION
See below for troubleshoong ‘compass error’.
Move at least 4 miles away from no fly zone. Most major
airports are no fly zone areas.
Move Q500 below 8,000 feet above MSL.
Review Motor Starng/Stopping procedure in manual.
Move Q500 away from large metal objects or surfaces.
Calibrate compass.
Check that nothing is obstrucng any propeller/motor,
turn the Q500 off then back on again.
Confirm that the flying area has 100 degrees of clear
view of the sky.
Wait for threat level to be reduced before flying.
Check to ensure propellers are not bent, nicked or
damaged in any way. Replace damaged propellers.
WARRANTY INFORMATION
Yuneec products and accessories are guaranteed against manufacturing defects for six (6) months from the original date of purchase. Yuneec’s sole obliga-
on in the event of such defects during this period is to repair or replace the defecve part or product with a comparable part or product at Yuneec’s sole
discreon. Except for such repair or replacement, the sale, processing or other handling of this product is without warranty, condion or other liability.
Damage (including crash damage) resulng from use, accident, or normal wear and tear is not covered by this or any warranty. Yuneec assumes no liability
for any accident, injury, death, loss, or other claim related to or resulng from the use of this product. In no event shall Yuneec be liable for incidental or
consequenal damages relang to or resulng from the use of this product or any of its parts. Please review the instrucons carefully when using the
products. Returns or replacements of parts and/or products may be subject to shipping, handling, replacement and/or restocking fees.
IMPORTANT NOTE: Crash damage is NOT covered under warranty.
29
ISSUE
Q500 Motors won’t
start
Q500 Flashes orange
twice between indicaons
Q500 beeps constantly
and motors won't start
Q500 Won’t hold
posion in hover