User manual
ST10+ and CGO3 Binding
28
Step 1) Turn on the ST10+, and if required tap the screen (outside of the
pop up status window) to bypass the RC and WiFi connecon process.
Step 6) Tap the ‘Bind’ buon and
select the ‘CGO3_XXXXXX’
camera listed in the column under
‘Camera’, then enter the password
‘1234567890’ when prompted
and tap ‘OK’ aer the connecon
has been established.
Step 7) Tap the ‘Camera Select’
buon and select proper camera
model listed int the column under
‘Choose a camera ’, then tap ‘OK’
aer the connecon has been
established.
Step 8) Tap the ‘Back’ buon two
(2) mes to return to the main
screen and the camera should
automacally connect to the
ST10+.
IMPORTANT NOTE: Streaming
video from the camera to the
ST10+ and to a separate
phone/tablet (or another Yuneec
transmier/personal ground
staon) at the same me is NOT
recommended as it will result in a
very significant lag in the video
downlink.
Step 2) Tap the ‘Model Select’
buon, and if required press ‘OK’
to bypass any pop up
warnings/alerts.
Step 3) Select the exisng model
(for example: the‘ TYPHOON’)
you would like to bind to (or
create a ‘New Model’), and if
required press ‘OK’ to bypass any
pop up warnings/alerts.
Step 4) Turn on the TYPHOON
and ensure that the camera is
powered on.
Step 5) if required tap the screen
(outside of the pop up status
window) to bypass the RC and
WiFi connecon process, then tap
the ‘Flight Sengs’ buon and
press ‘OK’ to bypass any pop up
warnings/alerts.
Model: Typhoon Welcome,Pilot 10:48:28 pm
10
GPS
Ready
SAT
13
POS
00.0000E
00.0000N
MODE
Angle
ALT
21.4
VOLTS
12.3 V
G-SPD
0.0 mph
DIS
22.5
System Sengs Flight Sengs Model Select
HOME
Model: Typhoon Welcome,Pilot 10:48:28 pm
10
Model Select
New Model Typhoon
Model: Typhoon Welcome,Pilot 10:48:28 pm
10
GPS
Ready
SAT
13
POS
00.0000E
00.0000N
MODE
Angle
ALT
21.4
VOLTS
12.3 V
G-SPD
0.0 mph
DIS
22.5
System Sengs Flight Sengs Model Select
HOME
Model: Typhoon
Welcome,Pilot 10:48:28 pm
10
CGO3_XXXXXXX
Model Camera
Choose a camera NAME:
C-GO1
C-GO2
C-GO3
C-GO3-Pro
Model: Typhoon
Welcome,Pilot 10:48:28 pm
10
Model: Typhoon Welcome,Pilot 10:48:28 pm 10
Bind
Camera Select
Hardware Monitor
Mode Select
Model: Typhoon
Welcome,Pilot 10:48:28 pm
10
Bind
Camera Select
Hardware Monitor
Mode Select
Not connected