User manual

29
GROUND IMAGING SYSTEM
Specifictaons
CGO STEADYGRIP™
Height: 223mm (8.78 in)
Depth (front to back): 182mm (7.17 in)
Width: 70mm (2.76 in)
Weight (without gimbal/baeries): 200g (7.05 oz)
Angle Control Range (Pitch): 30° to -85°
Required Baeries: 2850mAh Energizer® 8x 1.5V AA Baeries
(Sold Separately)
Runme: 48-64 minutes (depending on usage)
Baery Warnings and Usage Guidelines
WARNING: Alkaline Baeries May explode or leak, and cause burn injury if recharged,
disposed of in fire, mixed with a different baery type, inserted backwards or disassem-
bled. Replace all baeries at the same me. Do not carry baeries loose in your pocket
or purse. Do not remove the baery label.
WARNING: All instrucons and precauons must be read and followed exactly and you
must follow instrucons of the baery manufacturer.
WARNING: procedures, which if not properly followed, create the probability of property
damage, collateral damage and serious injury or create a high probability of superficial injury.
Failure to exercise care while using this product and comply with the following
condions and guidance could result in product malfuncon, excessive heat, fire,
property damage, and ulmately injury.
Lithium lon baeries are not toys. For the purpose of the document Li-lon, Li-Po, Li-Fe,
NiCd or NiMH baeries will be described as "Baeries".
Handling and Storage:
● Never alter, puncture or impact Baeries or related components.
● Do not directly connect the terminals with metal objects. This will short-circuit
Baeries, resulng in heat and electrical discharge.
● Never store loose Baeries together, the Baeries' terminals may contact one
another causing a short circuit.
● Never expose Baeries to extreme temperatures or direct sunlight.
● Always disconnect Baeries when not in use.
Before the First Charge:
● Ensure baeries are not damaged, as this may cause a short circuit of fire.
● Always refer to your charger's manual to ensure safe operaon.
● Always charge Baeries in an open area away from flammable materials, liquids and
surfaces.
● Never charge Baeries that are hot to the touch (above 120°F)
If at any me Baeries become damaged, hot, or begin to balloon or swell, disconnue
charging (or discharging) immediately. Quickly and safely disconnect the charger. Then
place the Baeries and/or charger in a safe, open area away from flammable materials
in an approved Li-Po bag to observe. Aer one hour, remove the Baeries from
service. DO NOT connue to handle, aempt to use, or ship the Baeries. Failure to
follow these procedures can cause damage to Baeries, personal property or cause
serious injury.
Damaged or swollen Baeries can be unstable and very hot. DO NOT touch baeries
unl they have cooled. Dispose of baeries in the manner required by your city,
county, state or country. Contact the appropriate Yuneec Product Support Office to
speak to a service technician for more informaon.
In the event of fire, a Class D, dry chemical fire exnguisher must be used then
baeries must be placed inside of an approved Li-Po bag.
Addional Guidelines and Warnings:
● In the event of a crash, always quickly and safely disconnect and remove Baeries
from the model. Then follow the previously listed safety procedures.
● If the internal contents of Baeries come into contact with your skin, wash the
affected area(s) with soap and water immediately. If it comes into contact with your
eye(s), flush them with generous amounts of water for 15 minutes and seek immedi-
ately medical aenon.