USER MANUAL V1.
CONTENTS Product Profile ................................................................. Introduction .................................................................... Specifications ................................................................. Overview ......................................................................... 04 04 04 07 Aircraft ............................................................................. 07 Charging ..............................................................
IONL1 PRO Camera Instructions .................................... 31 ............................................................. 39 Appendix .......................................................................... Upgrading the Firmware ................................................ LED Status Indication ..................................................... Disclaimer ........................................................................ Collection and Processing of Data ......................
Product Profile Introduction The TYPHOON H3 provides high-end image quality combined with the reliability and automated flight modes every photo and videographer desires. The TYPHOON H3 hexacopter is equipped with a 1" camera with 4K video resolution, a PX4-based flight controller, flight modes from Follow Me and Point of Interest to Curve Cable Cam. Relevant core areas of the TYPHOON H3 have been completely redesigned to provide more reliability and power for your everyday needs.
ESC Power (max) 25A ESC Voltage 12V~20V Flight Battery Type LIPO 4S Capacity 5250mAh Voltage 15.2V Energy 79.8Wh Net Weight 20.5oz (580g) Charger SC4000-4H Charging Time Approx. 1.5h-2h Max Charging Current 5A Max Discharging Rate 50A ST16S Ground Station Product Name Personal Ground Station Model ST16S Operating System Android™ Number of Channels 16 Control Transmission Distance/Range Up to 1 mile (1.6Km) (Optimum condition) Video Link Frequency Band 5.
Weight 13.2oz (375g) Operating Temperature 32° to 104°F (0° to 40°C) Storage Temperature 14° to 122°F (-10° to 50°C) SD Card Max/Min Capacity 128GB Gimbal Stabilization 3-axis (tilt, roll, pan) Angular Vibration Range ±0.02° Mount Detachable Max Angular Velocity Pitch: 30°/s, Yaw: 120°/s Camera Controllable Range Pitch: -110° to +30° Sensor 1 in CMOS, Effective Pixels: 20MP Lens FOV 91° F/2.8, 23mm Format Equivalent Photo Resolutions 3:2, 5472×3648 4:3, 4864×3648 16:9, 5472×3080 H.
Overview 01 02 03 01 09 10 11 12 01 02 03 04 05 06 07 13 14 15 08 16 17 02 03 04 18 19 20 21 22 23 25 26 24 27 TYPHOON H3 ION L1 PRO 01 Power Switch 02 Sonar 03 Retractable Landing Gear 01 02 03 04 Camera Lens USB Port Micro SD Card Slot 5GHz Antenna ST16S 12 Flight Mode Selection Switch 13 Elevator/Pitch Control (Mode2)/ Throttle/Altitude Control (Mode 1) 14 Aileron/Roll Control (Mode 2 and Mode 1) 15 Right Trim (Cruise Speed Trim) 16 Start/Stop Video Recording Button 17 Power Switch 18 2
$2."12$/&<%4 " A green blinking LED indicates the charger is powered on and ready to charge, and a red blinking LED indicates the battery is charging. It will take approximately 2.5 hours to charge a fully discharged (not over-discharged) battery. A solid green LED indicates the battery is fully charged. Alternating blinking and solid blue LED lights indicates Error. Be certain to never completely drain a TYPHOON H3 battery. Batteries should be stored at 30-50% charge, and never stored at full charge.
Compass Calibration CAUTION: Do not calibrate the compass in parking garages, close to buildings or near roads with a metal core. For optimum performance, only calibrate TYPHOON H3 in open spaces, far away from power lines and other metal structures or concrete buildings. NOTICE: Be sure to perform the compass calibration procedure at least 11 feet away from the nearest cell phone or other electronic devices to ensure proper calibration.
Placement before Takeoff WARNING: Always operate the TYPHOON H3 in open areas (approximately 10000 square feet/930 square meters or more) that are free from people, vehicles, trees and other obstructions. Never fly near or above crowds, airports or buildings. Never attempt to operate TYPHOON H3 nearby tall buildings/obstructions that do not offer a clear view of the sky (a minimum clearance of 100°).
Binding Binding the aircraft and ST16S NOTICE: The aircraft and ST16S Ground Station are already bound out of factory. There is no need to bind them. Pilot can follow the steps below if binding is needed. STEP 1: Power on the TYPHOON H3. After initialization completes, the two LEDs on rear arms will blink blue. STEP 2: Lift the aircraft upside down until all LEDs blink yellow quickly, and then turn the aircraft back on straight and level ground. STEP 3: Switch on the ST16S Ground Station.
Option 2 Press the icon ( ), then slide the sliding block, and the aircraft will take off. Then the icon ( ) will turn Point-to-Land icon ( ). Take Off Retracting the Landing Gear Raise the landing gear control using the landing gear control switch on the ST16S. Flight Modes SPORT MODE ANGLE MODE RTL MODE TS01 TS02 Angle ModeTS03 h Pitch 0˚ Channel Setting TS04 If the FlightTS05 Mode selection switch is in the center position, then the aircraft is in Angle Mode.
2.Interface introduction. 1)The curve on the left is the throttle Exp curve; 2)The middle curve is the direction Exp curve 3)The curve on the right is the Exp curve shared by aileron and elevator 4)The parameters of the current curve are marked in the rectangular lattice below each curve 5)Reset button 3.Setting introduction Power on the aircraft and remote control before setting.
1) If we slide the attitude sensitivity slider to the right, the attitude control of the aircraft will become more sensitive, and it will take shorter time for the aircraft to reach the desired attitude from hovering state; otherwise, if we slide to the left, the attitude control of the aircraft will become more sluggish, and it will take longer for the aircraft to reach the desired attitude from hovering state; 2) If you slide the brake sensitivity slider to the right, the aircraft's brake will become more
4) Press the right button of the right trim, and the aircraft will move right at a slow speed and constant speed. Press the right button again, and the aircraft will fly to the right at a faster speed until the maximum value of the trim is reached; 5) Press the left key of the right trim, the aircraft will move left at a slow speed and constant speed, and press again, the aircraft will fly left at a faster speed until the maximum value of the trim is reached.
PILOT 8m (HOME) HORIZONTAL DISTANCE FROM PILOT NOTICE: The default home altitude is 20m (65.6ft). But after the home altitude is reset, the latest data will be saved as the new default home altitude. NOTICE: Users can control pitch, roll and yaw directions during descent. NOTICE: After the Home Mode is activated, the aircraft will point its nose to the home point automatically. After the aircraft arrives to the home point and begins to descend, it will turn its tail pointing to the pilot.
IV. Once the Manual mode was switched on there is a M shows on the Flight mode indicator , and the rear motor led will turn blue NOTICE: When using Manual Mode you can take off before the drone was located by GPS system. But the drone can't hover by itself. The pilot must trim the joystick manually and continuously otherwise the drone will drift away. NOTICE: Even if the Manual mode has been switched on , The Drone position system will still enabled in follow conditions. 1.
IV. When the Distance between the Drone and pilot is longer than 8m ,Push the S4 switch to the front the drone will enter the Smart mode. There is a green S shows on the Flight mode indicator , and the rear motor led will also turn green. NOTICE: When the Smart mode is enabled the drone will enter the Headless flight control mode. NOTICE: When the remote controller GPS count is less than 10, the drone will quit the Smart mode automatically.
II. Safety Setting The maximum relative flight height of the aircraft can be set in the safety settings. Before unlocking, the height setting range is 20-120m; after unlocking, the height setting range is 20-500m. 1.Setup method Directly slide the maximum relative flight height setting slider to set the maximum relative flight height. Once the hand leaves the screen, the setting is completed. After the setting, the remote control screen will pop up a green √, indicating the setting is successful. 2.
Task Mode Tap the icon on the left bottom of the screen, and then you will enter task modes: CCC, Follow me, Journey, Orbit, Team Mode. NOTICE: When the voltage of the aircraft is lower than 30%, the TYPHOON H3 will exit TASK mode and the functions under the TASK mode won't be activated. CCC (Curve Cable Cam) Curve Cable Cam allows you to create an invisible route for TYPHOON H3 to fly along. Once the pilot sets the points, TYPHOON H3 will fly the set coordinates while remembering the heading.
Follow Me The Follow Me function allows TYPHOON H3 to follow the pilot, adjusting its location to the location of the ST16S Ground Station. This function is enabled when ST16S's GPS positioning has been acquired, and TYPHOON H3 is using shared GPS signal with the ST16S Ground Station. Watch me Watch me enables the camera to keep tracking the remote controller no matter where and how it moves as the camera can automatically tilt its angle according to the controller.
POI POI Point of Interest allows the pilot to select a subject they would like to orbit and have TYPHOON H3 orbit that subject autonomously. Center Point R H Radius 23.9 ft Height 28.9 ft Pause Tap the [ ] icon to set a center point and set an ideal radius by controlling the joystick. The height and radius data will be calculated automatically and indicated. Press the Start icon and push the Aileron/Roll control stick, the aircraft will begin to execute POI.
V. If it's the first time you bind the slave remote to the mast remote , please tap the Accept button on the mast remote screen. VI. Bind finished Master remote Slave remote NOTICE: Tap Stop Team Mode Button you can exit team mode ,no matter on the Master remote or the Slave remote VII. Operation Method 1. Master remote can only control the drone , can't control the gimbal and camera. 2. Tap the gimbal operation method select button , you can select the gimbal operation mode 2.
After Landing ALWAYS turn off TYPHOON H3 BEFORE turning off the ST16S Ground Station. Then remove the battery from TYPHOON H3 and allow it to cool to ambient/room temperature before recharging. NOTICE: If the signal of the remote control is lost, TYPHOON H3 will automatically return to the home point and hold its position (with a suitable GPS signal/lock) over the home position (except for low battery).
Proportional Control Rate Slider The Proportional Control Rate Slider located on the right side of the ST16S Ground Station allows you to set the overall climb/descend and directional control rates. Fly low and slow initially. Slow (Low Speed) position, the lowest control rates, is ideal for precision flight. High-speed (High Speed) position is used when transiting broad areas. Remote Control Setting 1. Open the remote control and wait for the remote control to start. 2. Click the settings button. 3.
III. Aux (B2) key user custom function Users can customize the function of the key 1. None, there will be no change in settings after pressing. 2. Photo mode: click the circle in front of photo mode to define the function of this key to the switch function of photo mode.
2. Language This remote control equipment provides two languages to choose from: Simplified Chinese and English. Click the language menu, and then select simplified Chinese or English as required. After setting, the corresponding language will be marked with green √ to identify the currently selected language. 3. Firmware version This menu can display the firmware versions of the remote control, autopilot, gimbal and camera in detail for the convenience of users.
Camera Control Gimbal Camera Tilt Control There is a gimbal tilt mode switch on ST16S labeled “S1.” When the switch is in up/middle position, the ION L1 PRO (or other gimbal system) gimbal camera is in Angle Mode. Use the slider (C) on the under-left side of the ST16S to set the tilt position of the gimbal camera. When the S1 is in the bottom position, the gimbal camera is in Velocity Mode. When the slider (C) is in the middle position, it means the velocity rate is 0 for the ION L1 PRO, disabling tilt.
4. Scroll to the bottom of the directory and click on the gimbal control setting menu. 5. Enter the gimbal control setting interface as shown in the figure below. 6. Setup of the Expo Curve setting of the tilt control of the gimbal. This function is used to adjust the operational curve of the slider for the tilt control slider in the tilt velocity mode of the gimbal, so as to achieve the most user-friendly feeling of the tilt control of the gimbal.
(far away from the origin on both sides) we can found that the curve is very steep, the gimbal tilt angular acceleration will be much bigger than before. This means when you already have a big difference input and even if you only give more or less input a little bit, it will course large gimbal tilt velocity increase or decrease.In other words the steeper the curve is the more sensitive you will feel. NOTICE: the parameter settings range from 0 to 1. 7.
IONL1 PRO Camera Instructions Quick preview of camera parameters I. interface description Camera / video mode switch 1. Photo mode interface description Shutter button Camera settings menu Photo mode selection menu Quick preview of camera parameters 2. Video mode page description Camera / video mode switch Video button Camera settings menu 3. Page overview 3.
ISO The default exposure mode of the camera is auto exposure, so the switch on the right side of the ISO is auto mode by default. In auto mode, the ISO cannot be adjusted manually. The ISO can only be adjusted manually after the auto mode is turned off. After the automatic ISO is turned off, the left and right arrow signs appear in the ISO slider. The user can drag the ISO slider to set the ISO parameters of the camera. The higher the ISO is, the more sensitive the camera is to light.
Exposure compensation In auto exposure mode, the user can adjust the light and shade of the picture by sliding the exposure compensation value slider. Photo / video parameter setting Click the camera setting menu, pop up a dialog box, and select "landscape icon" or "play key icon" to enter the photo / video parameter setting page. Photo / Video Format 1. Enter the photo parameter setting menu in photo mode 1.1.
2. Enter video parameter setting menu in video recording mode 2.1 Video format ION-L1 PRO gimbal camera provides the following video formats for users to choose from H264 coded format 4K 4096X2160 24/25/30/48/50/60frame 4K 3840X2160 24/25/30/48/50/60frame 2.7K 2720X1530 24/25/30/48/50/60frame 1080P 1920X1080 24/25/30/48/50/60/120frame 720P 1280X720 24/25/30/48/50/60/120frame H265 coded format 4K 4096X2160 24/25/30frame 4K 3840X2160 24/25/30frame 2.
5. White Balance The ION-L1 PRO gimbal camera provides the following white balance modes to choose. Click the custom menu, the color temperature slider will pop up below, and the user can choose the camera white balance setting within the range of 2000K to 12000k. 6.Metering ION L1 PRO camera provides three different metering modes: Spot metering, average metering and center metering. After selecting the spot metering, the user can select the metering area on the screen.
7. Picture mode 7.1 Picture mode menu in photo mode The ION-L1 PRO gimbal camera provides the following white balance modes to choose. In Photo mode, ION L1 PRO gimbal camera provides five modes: normal, vivid, WDR, B&W and custom. After the user selects custom mode, three slide ways of brightness, contrast and saturation will pop up for user-defined settings. 7.2 Picture mode menu in video mode Compared with the photographing model, this menu in the video recording mode has a 10 bit log option.
9. Gridlines Turn on the gridline switch, and the gridline auxiliary user composition will appear on the screen. 10. Histogram Turn on the histogram switch, and the exposure histogram will appear on the screen to assist the user to judge the exposure. 11. Center point Turn on the center point switch, the cross line appears in the center of the screen to assist the user in composition.
12. Anti-Flicker This function will enable the camera to shoot a stable picture under the stroboscopic light source (such as incandescent lamp). The options are automatic, 50Hz and 60Hz. The user can choose according to the actual needs to achieve the best picture effect. 13. Format SD card Click Format SD card to pop up the following confirmation pop-up box, click YES camera to format SD card 14.
Gallery Function The main function of Gallery preview enables UAV to see the pictures and videos taken by itself on the remote control without pulling out the SD card in the camera. It realizes that UAV can check the aerial effect of its own aerial photos without landing, so that users can quickly reshoot for the unsatisfactory photos or videos, greatly improving the efficiency of aerial photos of UAV. 1.Click the photo icon in the lower right corner to enter the gallery function 2.
NOTICE: the Delete button in the gallery will only delete the screenshot / recording file stored in the remote control, and will not delete the file stored in the SD card. 3. Photo Preview Click the photo to be enlarged and previewed in non editing state to enter the preview of single photophoto. Click the back button in the upper left corner to return to the upper menu. Click the information icon in the upper right corner to display the information (time and resolution) of the screenshot.
4. Video Preview Click the video to enlarge the preview in the non editing state to enter the preview of a single video Click the back button in the upper left corner to return to the upper menu, click the information icon in the upper right corner to display the screen recording information (time and resolution); click the play button in the center of the screen to play the preview video, click the Delete button to delete the currently playing video.
STEP 1: Tap the system settings icon[ ] on the right top of the screen, and then select the icon ( ). Scroll down and tap Check for updates. STEP 2: Choose an available WiFi, input the password and tap OK. STEP 3: When Available Updates displayed on the screen, tap the Download icon. Wait for a few minutes till a 100% completed circle is displayed, which means the download completes. STEP 4: Switch on the aircraft first, and then return back to the main interface of the screen.
LED Status Indication All the LEDs mentioned are numbered as shown. The color of the icon indicates the color of the LED. indicates the LED flashing. indicates the LED solid on.
Disclaimer Yuneec International (China) Co., Ltd shall not be held liable for any damage, injury or for use of the product in violation with legal regulations, especially in the following circumstances: Damage and/or injury as well violation of legal regulations resulting from a failure to comply with the operating instructions or the instructions at www.yuneec.
Collection and Processing of Data Yuneec may collect navigation information such as GPS data to help improve our products. We may also collect Depth Map information and Infrared Image information from your drone delivered to our service center for repair and maintenance service or any other service. We may also collect other information such as device information, server log information, etc.
from approximately 40–120 ° F (5–49 ° C). Do not store the battery or aircraft in a hot garage, car or direct sunlight. If stored in a hot garage or car the battery can be damaged or even catch fire. Never leave batteries, chargers and power supplies unattended during use. Never attempt to charge low voltage, ballooned/swollen, damaged or wet batteries. Never allow children under 14 years of age to charge batteries. Never charge a battery if any of the wire leads have been damaged or shorted.
as doing so could cause serious injury or even death. Always keep chemicals, small parts and electronic components out of the reach of children. To ensure safe fly, it is recommended to install the propeller protectors when operating the aircraft indoors or nearby crowds. Carefully follow the instructions and warnings included with this aircraft and any related accessories, components or parts (including, but not limited to, chargers, rechargeable batteries, etc.).
IC Radiation Exposure Statement for Canada This device complies with Industry Canada license-exempt RSS standard (s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.