User manual

6
CHAPTER 3
Setting Up Your Player
Once your dongle has been setup, as per the instructions in the previous
chapter, you’re ready to access it and complete the guided setup for your
wireless network connection.
Accessing your Dongle
After you plug your dongle into a power outlet (through power adapter or
through TV USB port), it will be switched ON. There is a ‘Power Button’ on
the remote control to turn the power OFF/ON for the dongle. You can now
simply access your player through your TV.
1. Turn ON your TV and select the input source as HDMI port, at which you
have connected the dongle.
2. If the dongle is connected properly, you will see ‘Welcome Screen’ with a
message, “Welcome to YuppTV”.
3. After the Welcome Screen, the boot up process will be completed by the
dongle and you will be able to see the Home Page.
Connecting your player to Internet network
Once you’ve reached the home page, press “Settings” button on your
YuppTV remote or select “Settings” icon from the home screen using the
remote navigations keys, and press the ‘Ok’ button to select.
1. In Settings, the first option on the left-hand side menu will be “Wi-Fi”. Select
this option and make sure the WIFI button is ON.
2. The dongle will automatically search for the Wi-Fi networks in range. Please
ensure you have a Wi-Fi router in range of the dongle. If no networks are
found, please confirm that the Wi-Fi button and router are switched ON.
3. Select the Wi-Fi network and enter the password using the keypad on your
TV screen. You can use your remote arrow keys to select letters on the
keypad.
4. Once the password is set, press back button on the remote, and go to the
“Connect” button on the screen using arrow keys on the remote.
5. If that network shows as “Connected”, it means that the network is setup
and you are ready to use the dongle.
6. To finish the setup, press the “Home” button on the remote control.