User's Manual
3. Remove the DTA set plate.
Hold the both ends of the DTA set plate.•
Lift it slightly and then remove •
it from the deep end.
Remove dirt from the surface by wiping •
it with a soft water-moistened cloth.
morf erutsiom evomer ,trid gnivomer retfA •
the surface by wiping it with a dry soft cloth.
ti hsaw ,trid evomer tonnac uoy nehW •
with water using a soft sponge. After
washing it with water, let it dry naturally
to remove moisture completely.
4. Remove the DTA cells.
Lift the DTA cells slightly and •
remove it from the left side.
Remove dirt from the surface by wiping •
it with a soft water-moistened cloth.
evomer ,trid gnivomer retfA •
moisture from the surface by
wiping it with a dry soft cloth.
63