User's Manual

14
Turning on the power
Press the power switch,turns on the power of packaging machine.
Even when the packing machine has been turned ON, do not start operation until the eating
of the heater roller is completed.
*Operate the breaker before installing the packing machine or cleaning the printer head.
1. Connect the power plug to the
outlet.
Be sure to use an AC100V outlet •
with the 3P earth.
Do not use a multi-outlet extension •
cord from a device such as a table tap.
CAUTION
Be sure to connect earth to avoid power-supply
noises and electric shocks. Lack of the power
capacity and rapid voltage fl uctuations may result
in malfunctions.
2. Open the lower door.
Push [PUSH] on the acrylic door •
and open it while folding it.
Unhook to open the door •
on the conveyor side.
使いかた（基本）