User Manual

camera using the HTTP API. (for HTTP API information, contact Z CAM technical
support)
n Serial: The camera will be controlled by UART command from a computer
through USB port.
• HDMI: Display Info. / OSD Layout / Resolution / Use EDID
n Display Info: On / Off. Turn on / off camera status on HDMI monitor.
n OSD Layout: Type 1 / Type 2
Type 1: Assist tool as waveform etc. display on the video directly.
Type 2: Add the black frame area to display assist tool.
n Resolution: Auto / Manual (options supported by the HDMI display).
Auto: The camera will select the most suitable format (resolution & frame rate)
from the HDMI monitor.
Manual: Here will list the formats supported by the HDMI monitor for the user to
select manually.
n Use ED ID: Disable / Enable. This setting determines whether the camera
automatically reads the EDID information of the HDMI connected monitor.
2.10. System
• Clear Settings：Clear all the Settings in the camera and set them to default values.
• Format Card：Format the SD card or the external SSD connected through USB Type
C port (if there is no SD card in the camera). Please note that formatting will erase
ALL DATA in the storage!