User's Manual

Nov/5th/2002
10
WEP
To enable the WEP encryption, check the “Enable static WEP key encryption” check box
and select the encryption type, either 40 bit or 128 bit. Then enter a WEP Key in the WEP
Key field.
For 40 bit encryption you may choose:
 ASCII: 5 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g.
MyKey)
 Hex: 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g.
11AA22BB33)
For 128 bit encryption you may choose:
 ASCII: 13 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g.
MyKey12345678)
 Hex: 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g.
00112233445566778899AABBCC).
After defining the WEP keys, click the APPLY button to make the configuration take
effect.